View IE-77016-CM-LC_1166307.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

users manual IE-77016-CM-LC level converter for in-circuit emulator target devices m m m m pd77015 m m m m pd77017 m m m m pd77018 m m m m pd77018a m m m m pd77019 m m m m pd77110 m m m m pd77111 m m m m pd77112 document no. u14139ej1v0umj1 (1st edition) date published august 2000 n cp(k) printed in japan 1999
users manual u14139ej1v0um00 2 [memo]
users manual u14139ej1v0um00 3 this product is designed to be used in a commercial or industrial district. if it is used in a residential district or in an a rea in the vicinity of a residential district, radio and tv receivers in the district may be affected. use this product correctly by carefully reading its users manual. windows is either a registered trademark or a trademark of microsoft corporation in the united states and/or other countries. pc/at is a trademark of international business machines corporation. m8e 00. 4 the information in this document is current as of july, 2000. the information is subject to change without notice. for actual design-in, refer to the latest publications of nec's data sheets or data books, etc., for the most up-to-date specifications of nec semiconductor products. not all products and/or types are available in every country. please check with an nec sales representative for availability and additional information. no part of this document may be copied or reproduced in any form or by any means without prior written consent of nec. nec assumes no responsibility for any errors that may appear in this document. nec does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of nec semiconductor products listed in this document or any other liability arising from the use of such products. no license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of nec or others. descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. the incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. nec assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. while nec endeavours to enhance the quality, reliability and safety of nec semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. to minimize risks of damage to property or injury (including death) to persons arising from defects in nec semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. nec semiconductor products are classified into the following three quality grades: "standard", "special" and "specific". the "specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. the recommended applications of a semiconductor product depend on its quality grade, as indicated below. customers must check the quality grade of each semiconductor product before using it in a particular application. "standard": computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "special": transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "specific": aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. the quality grade of nec semiconductor products is "standard" unless otherwise expressly specified in nec's data sheets or data books, etc. if customers wish to use nec semiconductor products in applications not intended by nec, they must contact an nec sales representative in advance to determine nec's willingness to support a given application. (note) (1) "nec" as used in this statement means nec corporation and also includes its majority-owned subsidiaries. (2) "nec semiconductor products" means any semiconductor product developed or manufactured by or for nec (as defined above).
users manual u14139ej1v0um00 4 regional information some information contained in this document may vary from country to country. before using any nec product in your application, piease contact the nec office in your country to obtain a list of authorized representatives and distributors. they will verify: device availability ordering information product release schedule availability of related technical literature development environment specifications (for example, specifications for third-party tools and components, host computers, power plugs, ac supply voltages, and so forth) network requirements in addition, trademarks, registered trademarks, export restrictions, and other legal issues may also vary from country to country. nec electronics inc. (u.s.) santa clara, california tel: 408-588-6000 800-366-9782 fax: 408-588-6130 800-729-9288 nec electronics (germany) gmbh duesseldorf, germany tel: 0211-65 03 02 fax: 0211-65 03 490 nec electronics (uk) ltd. milton keynes, uk tel: 01908-691-133 fax: 01908-670-290 nec electronics italiana s.r.l. milano, italy tel: 02-66 75 41 fax: 02-66 75 42 99 nec electronics (germany) gmbh benelux office eindhoven, the netherlands tel: 040-2445845 fax: 040-2444580 nec electronics (france) s.a. velizy-villacoublay, france tel: 01-30-67 58 00 fax: 01-30-67 58 99 nec electronics (france) s.a. madrid office madrid, spain tel: 91-504-2787 fax: 91-504-2860 nec electronics (germany) gmbh scandinavia office taeby, sweden tel: 08-63 80 820 fax: 08-63 80 388 nec electronics hong kong ltd. hong kong tel: 2886-9318 fax: 2886-9022/9044 nec electronics hong kong ltd. seoul branch seoul, korea tel: 02-528-0303 fax: 02-528-4411 nec electronics singapore pte. ltd. united square, singapore tel: 65-253-8311 fax: 65-250-3583 nec electronics taiwan ltd. taipei, taiwan tel: 02-2719-2377 fax: 02-2719-5951 nec do brasil s.a. electron devices division guarulhos-sp brasil tel: 55-11-6462-6810 fax: 55-11-6462-6829 j00.7
users manual u14139ej1v0um00 5 introduction target readers this manual is intended for engineers who understand the functions of the m pd77016 family and m pd77111 family and wish to design application programs using these products. the m m m m pd77016 family is used to refer collectively to the m m m m pd77015, 77016, 77017, 77018, 77018, 77018a, 77019, and 77019-013. however, the m m m m pd77016 is not one of the target devices in this manual. the m m m m pd77111 family is used to refer collectively to the m m m m pd77110, 77111, and 77112. purpose this manual is designed to give you an understanding of the basic specifications of the IE-77016-CM-LC and its correct use. organization this manual consists of the following chapters. chapter 1 general chapter 2 part names and functions of components chapter 3 installation how to read this manual it is assumed that the readers of this manual have general knowledge of logic circuits and microcontrollers. the IE-77016-CM-LC is used connected to the ie-77016-98/pc in- circuit emulator. this manual describes the basic setup procedure and how to connect the IE-77016-CM-LC to the ie-77016-98/pc. for additional information on the ie-77016-98/pc, refer to the ie-77016-98/pc users manual . to understand the basic specifications and use method ? read this manual in the order of the contents. to learn about the operation method of the id77016, the function of commands, and software settings ? read the id77016 users manual (separately available) conventions data significance: higher digits on the left and lower digits on the right active low representation: (overscore over pin or signal name) note : footnote for item marked with note in the text caution : information requiring particular attention remark : supplementary information numerical representation: binary ... or 0b decimal ... hexadecimal ... 0
users manual u14139ej1v0um00 6 related documents the documents listed below may include preliminary versions. however, preliminary versions are not marked as such. documents related to the m m m m pd77016 document name users manual application note part number pamphlet data sheet architecture instructions basic software m pd77016 u10891e m pd77015 m pd77017 m pd77018 u10902e m pd77018a m pd77019 u11849e m pd77019-013 u12395e u13053e u10503e u13116e u11958e documents related to the m m m m pd77111 document name users manual application note part number pamphlet data sheet architecture instructions basic software m pd77110 u13858e m pd77111 u12801e m pd77112 u12395e u13858e under preparation u13116e u11958e documents related to development tools document name document number ie-77016-98/pc users manual hardware eeu-1541 IE-77016-CM-LC users manual this manual caution the related documents listed above are subject to change without notice. be sure to use the latest version of each document for designing.
users manual u14139ej1v0um00 7 contents chapter 1 general ................................................................................................................ ...... 9 1.1 checking packing box ........................................................................................................ .. 10 1.2 operating environment ....................................................................................................... .. 10 1.2.1 ie-77016-98/pc (sold separately).......................................................................................... .... 10 1.2.2 id77016 (sold separately) ................................................................................................. ......... 10 chapter 2 part names and functions of components ........................................... 11 2.1 part names of IE-77016-CM-LC component ....................................................................... 11 2.2 functions of IE-77016-CM-LC component.......................................................................... 12 2.2.1 IE-77016-CM-LC component functions .................................................................................... 12 2.2.2 functions of accessories .................................................................................................. ......... 12 chapter 3 installation ........................................................................................................... .. 13 3.1 IE-77016-CM-LC settings ..................................................................................................... .13 3.1.1 dipsw1: selecting the jtag interface signal level................................................................... 13 3.1.2 dipsw2: forced trst signal output enable/disable selection ................................................. 13 3.2 ie-77016-98/pc settings ..................................................................................................... ... 13 3.2.1 connecting the IE-77016-CM-LC and ie-77016-98/pc ............................................................. 13 3.3 connecting the target system and IE-77016-CM-LC ......................................................... 14 3.3.1 in the case of the m pd77016 family (except m pd77016) .......................................................... 14 3.3.2 in the case of the m pd77111 family .......................................................................................... 14 3.4 switching power on.......................................................................................................... .... 15 3.5 starting up id77016 ......................................................................................................... ...... 15 appendix target system pins................................................................................................ ... 17
users manual u14139ej1v0um00 8 list of figures figure no. title page 1-1. system configuration ....................................................................................................... ...................... 9 2-1. external view of IE-77016-CM-LC............................................................................................ .............. 11 2-2. external view of flat cable ................................................................................................ .................... 11 3-1. connecting target system and IE-77016-CM-LC ................................................................................ .. 14
users manual u14139ej1v0um00 9 chapter 1 general the IE-77016-CM-LC is a jtag signal level converter that converts +5 v jtag interface signals input/output from an ie-77016-98/pc, which is an in-circuit emulator for the m pd77016 family note and the m pd77111 family, to +3 v or +2.5 v jtag interface signals. by combining the IE-77016-CM-LC with the ie-77016-98/pc and id77016 (debugger control software), it is possible to use the in-circuit emulation function built in the m pd77016 family and the m pd77111 family. figure 1-1 shows the system configuration. note the m pd77016 is excluded. in the case of the m pd77016, the +5 v jtag interface signals input/output from the ie-77016-98/pc can be input/output as is to the device debug pin. at this time, use the cable provided with the ie-77016-98/pc. figure 1-1. system configuration host machine ibm pc/at tm or compatibles or pc-9800 series ie-77016-98/pc (sold separately) ie connection cable (supplied with IE-77016-CM-LC) IE-77016-CM-LC flat cable (supplied with IE-77016-CM-LC) id77016 (sold separately) target system on which device of the pd77016 family or pd77111 family is mounted m m remark the term id77016 is a debugger control software product name in japan. outside of japan, please regard id77016 as general debugger control software.
chapter 1 general users manual u14139ej1v0um00 10 1.1 checking packing box the IE-77016-CM-LC packing box contains an IE-77016-CM-LC main unit, a guarantee card, a packing list, and a bag (accessory bag) containing the accessories. the accessory bag contains this manual and the cables. please verify the contents of this bag. if there are missing or damaged items, contact an nec sales representative or an nec distributor. (1) main unit IE-77016-CM-LC (2) accessories IE-77016-CM-LC connection cable 1 10-pin flat cable 1 12-pin flat cable 1 14-pin flat cable 1 users manual (this manual) 1 guarantee card 1 packing list 1 1.2 operating environment the IE-77016-CM-LCs operating environment conforms to the operating environment of the ie-77016-98/pc and id77016. 1.2.1 ie-77016-98/pc (sold separately) this is the board for the interface between the in-circuit emulation function built in the device and the host machine. there are two types of board available depending on the host machine. the ie-77016-pc is inserted in the isa bus slot of ibm pc/at or compatibles, and the ie-77016-98 is inserted in the c bus slot of pc-9800 series computers. for details, refer to the ie-77016 98/pc users manual . 1.2.2 id77016 (sold separately) this is the debugger control software for controlling the on-chip emulation function in the device from the host machine. it operates on windows tm 95/nt. for details, refer to the id77016 users manual .
users manual u14139ej1v0um00 11 chapter 2 part names and functions of components the part names of the IE-77016-CM-LC and their function are described below. 2.1 part names of IE-77016-CM-LC component figure 2-1. external view of IE-77016-CM-LC output dipsw host trstb target on/off interface level converter IE-77016-CM-LC flat cable cable for ie connection on (sliding switch) on (push switch) figure 2-2. external view of flat cable (a) 10-pin flat cable (for the pd77016 family) (b) 12-pin flat cable (for the pd77111 family) (c) 14-pin flat cable (for the pd77111 family) m m m
chapter 2 part names and functions of components users manual u14139ej1v0um00 12 2.2 functions of IE-77016-CM-LC component 2.2.1 IE-77016-CM-LC component functions name function on/off (sw1) jtag interface signal output on/off on : output jtag signal from host to target system. off: do not output jtag signal from host to target system. trstb (sw2) forced trst signal output when on, an active signal is input to the trst pin of the device. this switch is enabled/disabled by the value of dipsw-2. dipsw-1 (dipsw-1) jtag interface signal level selection. on : +2.5 v off: +3.3 v (factory setting) dipsw-2 (dipsw-2) forced trst signal output enable/disable selection. on : enabled off: disabled (factory setting) output (led1) jtag signal output indicator. lights when the jtag signal is output from the target system. target (j1) connector used for connection to target device. use the flat cable supplied with the IE-77016-CM-LC together with the device to be debugged. host (j2) connector used for connection to ie-77016-98/pc. use the ie connection cable supplied with the IE-77016-CM-LC to connect to the host machine. 2.2.2 functions of accessories name function cable for ie connection connects the IE-77016-CM-LC with the ie-77016-98/pc. 10-pin flat cable connects the IE-77016-CM-LC with the target device on the target system (for the m pd77016 family). 12-pin flat cable connects the IE-77016-CM-LC with the target device on the target system (for the m pd77111 family). 14-pin flat cable strengthened version of the 12-pin flat cable. when using this cable, a corresponding measure must also be implemented on the target system side (for the m pd77111 family).
users manual u14139ej1v0um00 13 chapter 3 installation 3.1 IE-77016-CM-LC settings 3.1.1 dipsw1: selecting the jtag interface signal level this dip switch is used to select whether to convert the +5 v signal output from the ie-77016-98/pc to +2.5 v or +3.3 v. if a device of the m pd77016 family or m pd77111 family is used, set this dip switch to off. to select the +2.5 v input/output voltage for the jtag interface, for example in order to support asic products, set this dip switch to on. setting value function on signal is converted to +2.5 v and output from the target (j1) connector. off signal is converted to +3.3 v and output from the target (j1) connector (factory setting). 3.1.2 dipsw2: forced trst signal output enable/disable selection the trstb (sw2) switch is used to enable/disable forced trst signal output. normally, set this switch to off. also, if the target device that is used belongs to the m pd77016 family, the trstb (sw2) switch is disabled regardless of the setting of this switch. setting value function on enables trstb (sw2) switch. off disables trstb (sw2) switch (factory setting). 3.2 y ie-77016-98/pc settings following the instructions given in the ie-77016-98/pc users manual, set up the ie-77016-98/pc to the host machine. 3.2.1 connecting the IE-77016-CM-LC and ie-77016-98/pc connect the j2 connector of the IE-77016-CM-LC and the cn3 connector of the ie-77016-98/pc to the ie connection cable supplied with the IE-77016-CM-LC. do not use the jtag cable supplied with the ie-77016-98/pc.
chapter 3 installation users manual u14139ej1v0um00 14 3.3 connecting the target system and IE-77016-CM-LC 3.3.1 in the case of the m m m m pd77016 family (except m m m m pd77016) connect the IE-77016-CM-LC to the target system using the 10-pin flat cable supplied with the IE-77016-CM-LC. first connect the 14-pin connector of the flat cable to the j1 connector of the IE-77016-CM-LC. then connect the 10-pin connector to the pin provided on the target system side (refer to appendix target system pins ). 3.3.2 in the case of the m m m m pd77111 family connect the IE-77016-CM-LC to the target system using the 12-pin (or 14-pin) flat cable supplied with the ie- 77016-cm-lc. first connect the 14-pin connector of the flat cable to the j1 connector of the IE-77016-CM-LC. then connect the 12-pin (or 14-pin) connector to the pin provided on the target system side (refer to appendix target system pins ). remark connector pins with 14-pin specifications are recommended for the target system side. in the case of the supplied flat cables, the 14-pin flat cable is recommended over the 12-pin flat cable due to its higher strength. if connecting a connector pin with 12-pin specifications to the target system, the 14-pin flat cable can be used, if enough space is left when positioning components around the connector pin so that the flat cable connector does not interfere with the components on the target device. in this case, since there are no signals for the 2 extra pins of the 14-pin flat cable, no special handling is required for these 2 pins. figure 3-1. connecting target system and IE-77016-CM-LC 10/12/14-pin flat cable (included with IE-77016-CM-LC) to IE-77016-CM-LC j1 target system
chapter 3 installation users manual guide u14139ej1v0um00 15 3.4 switching power on next, switch the power on following the sequence described below. follow the reverse sequence when switching the power off. (1) switch on the host machine. (2) switch on the target system. (3) set the sw1 of the IE-77016-CM-LC to on note (jtag signal is output). note this switch does not control the power of the IE-77016-CM-LC. caution if removing or replacing devices on the target system, be sure to set sw1 of the IE-77016-CM-LC to off when you switch off the power of the target system. 3.5 y starting up id77016 start up the id77016 on the host machine. for details, refer to the id77016 users manual .
users manual u14139ej1v0um00 16 [memo]
users manual u14139ej1v0um00 17 appendix target system pins provide a dedicated debug pin on the target system. [in the case of the m m m m pd77016 family (except m m m m pd77016)] ? when using the 10-pin flat cable gnd gnd 6 mm 17 mm 2.54 mm 2.54 mm 4 tms tdi tck tice tdo pd77015, m pd77017, m pd77018, m pd77018a, m pd77019 m = pin ( 0.635, i = 6 mm) = key removed (to prevent incorrect insertion, to not provide pin.)
appendix target system pins users manual u14139ej1v0um00 18 [in the case of the m m m m pd77111 family] ? when using the 12-pin flat cable gnd gnd 6 mm 16 mm 2.54 mm 2.54 mm 5 tms trst tdi tck tice tdo pd77110, m pd77111, m pd77112, m = pin ( 0.635, i = 6 mm) = key removed (to prevent incorrect insertion, to not provide pin.) ? when using the 14-pin flat cable (recommended) gnd gnd 6 mm 22 mm 2.54 mm 2.54 mm 6 tms trst tdi tck tice tdo pd77110, m pd77111, m pd77112, m = pin ( 0.635, i = 6 mm) = key removed (to prevent incorrect insertion, to not provide pin.)
although nec has taken all possible steps to ensure that the documentation supplied to our customers is complete, bug free and up-to-date, we readily accept that errors may occur. despite all the care and precautions we've taken, you may encounter problems in the documentation. please complete this form whenever you'd like to report errors or suggest improvements to us. hong kong, philippines, oceania nec electronics hong kong ltd. fax: +852-2886-9022/9044 korea nec electronics hong kong ltd. seoul branch fax: 02-528-4411 taiwan nec electronics taiwan ltd. fax: 02-2719-5951 address north america nec electronics inc. corporate communications dept. fax: 1-800-729-9288 1-408-588-6130 europe nec electronics (europe) gmbh technical documentation dept. fax: +49-211-6503-274 south america nec do brasil s.a. fax: +55-11-6462-6829 asian nations except philippines nec electronics singapore pte. ltd. fax: +65-250-3583 japan nec semiconductor technical hotline fax: 044-435-9608 i would like to report the following error/make the following suggestion: document title: document number: page number: thank you for your kind support. if possible, please fax the referenced page or drawing. excellent good acceptable poor document rating clarity technical accuracy organization cs 00.6 name company from: tel. fax facsimile message

▲Up To Search▲

Price & Availability of IE-77016-CM-LC

	To Download IE-77016-CM-LC Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .